주요 콘텐츠로 건너뛰기

모델 A1502 / 2.4, 2.6 또는 2.8 GHz 듀얼-코어 Intel 프로세서 / 2013년 10월 출시

552 질문 전체 보기

Part of the components covered by a sticker

Inside the 13" MacBook Pro with Retina display Late 2013 there is a part close to the battery with some chips that are covered with a sticker and a warning message. I guess those are related to the battery but could not find anything specific.

After a liquid spill I have cleaned the logic board but the battery is not working and I suspect it could be because it is very sticky on that part (it was Coca Cola, terrible)

Is it safe to clean that part with alcohol as I did with the rest of the components or better not to touch it in any way?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

@claudiosposito " I just checked the battery logic board and one chip looks damaged" and "some chips that are covered with a sticker and a warning message" hard to identify. Post some good pictures of what you see with your question. For that use this guide 기존 질문에 이미지 추가하기 It will allow us to see what you see.

댓글 달기

답변 1개

가장 유용한 답변

Isopropyl alcohol is safe to use on most PCBs. Don't get it on any mechanical parts though, like optical or hard drives, or fans. Use 70-99% isopropyl alcohol and use a swab to dab it on, then if debris needs to be cleaned off, use a soft cloth. Once the debris is clear, dab on a little bit of alcohol over the surfaces in question, then let it evaporate completely.

Don't get anhydrous alcohol, as pure chemicals can be dangerous and finicky to work with.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thank you for the tips. I just checked the battery logic board and one chip looks damaged, I'll bring it to the Apple Store to replace the battery.

댓글 달기

귀하의 답변을 추가하세요

Claudio Sposito 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 165