Home Button Not Working

Question

iPhone 6

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Matt Primerano @mprim14

평판: 21

Blitztronics

2

1

게시일: 2017년 1월 13일

옵션

Home Button Not Working

The main board flex cable that to the home button broke on one of the connectors, which in turn ruined the original home button(no more Touch ID). I pulled the cable off of an iPhone 6 that I know had home button functionality and tried an after market home button, to reveal no touch input at all. I tried a few different home buttons as well and none worked. Could there be something else wrong that I've overlooked that could be the issue here? I plan to order another main board flex and home button but any ideas in the meantime would be helpful. Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 3개

Which part exactly got broken for home button connection? The home button extension cable connector on the logic board? The home button extension cable teared? The home button cable itself got ripped?

Ben 의 2017년 1월 13일

Alright thanks y'all!

Matt Primerano 의 2017년 1월 14일

If you go to setting / general / accessibility turn it on then you get the home button on your screen . Works just like the real button..

Speek 의 2018년 6월 30일

댓글 달기

답변 2개

선택된 답변

iMedic @theimedic

평판: 57.5k

iMedic Phone Repairs

18

77

212

게시일: 2017년 1월 13일

옵션

Yeah, im with Ben. You're post is confusing. If you need the extension cable, you should be fine. I order those moderately frequently

iPhone 6 Home Button Cable Replacement

iPhone 6 Home Button Link Cable

But you have me confused, what do you mean broke on one of the connectors? You mean the sockets? On the top of the logic board?

One of these?

상품

iPhone 6 Home Button Link Cable

$4.99

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 6개:

Sorry didn't mean to be confusing. The home button link cable fell apart at the connector closest to the home button (logic board is fine). In trying to disconnect the link cable from the home button, the connector fell off of the home button as well. So I took a new home button, and a new home button link cable and installed them, but home button functionality didn't return

Matt Primerano 의 2017년 1월 14일

Right, and you said the "new" parts, were known good?

iMedic 의 2017년 1월 14일

Link cable was known good, pulled it from my persona phone and tried an after market cable. I also tried two different home buttons that came right out of the packaging. I suppose they both may have been defective but I'd like to hope not

Matt Primerano 의 2017년 1월 14일

Sounds unlikely the two new buttons would be bad. @refectio can I get a second opinion on this?

iMedic 의 2017년 1월 14일

If the two buttons came in the same batch, perhaps they could both be defective...especially if the seller is on eBay or AMZN.

It's hard to see anything else wrong from this perspective.

Minho 의 2017년 1월 14일

댓글 1개 더보기

댓글 달기

Which part exactly got broken for home button connection? The home button extension cable connector on the logic board? The home button extension cable teared? The home button cable itself got ripped? — Ben
If you go to setting / general / accessibility turn it on then you get the home button on your screen . Works just like the real button.. — Speek
Sorry didn't mean to be confusing. The home button link cable fell apart at the connector closest to the home button (logic board is fine). In trying to disconnect the link cable from the home button, the connector fell off of the home button as well. So I took a new home button, and a new home button link cable and installed them, but home button functionality didn't return — Matt Primerano
Link cable was known good, pulled it from my persona phone and tried an after market cable. I also tried two different home buttons that came right out of the packaging. I suppose they both may have been defective but I'd like to hope not — Matt Primerano
Sounds unlikely the two new buttons would be bad. @refectio can I get a second opinion on this? — iMedic
If the two buttons came in the same batch, perhaps they could both be defective...especially if the seller is on eBay or AMZN.

It's hard to see anything else wrong from this perspective. — Minho

Muhamad @sirfixalot24434 평판: 661 5 1 1 · Answer 1 · 2017-01-14T17:18:01-07:00

Hello Matt. So sorry to hear about your problem, unfortunately i have some bad news for you. Every single home button on the iPhone 6 and up has a small chip on the flex which has a kind of special code that matches with your motherboard. If you replace the home button, the motherboard will recognize that that part is not the original home button. There for it will never allow you to use the Touch I.D again. Not only that, if you ever try to restore or update your phone, it will get stuck on the "connect to itunes" screen. And every time you try to restore it, it will not fully restore, and it will give you the hardware issue error code. So then your phone basically becomes a brick. So hold on to that flex cable with the little chip in between the button itself and the plug in part. If the chip is still connected to the plug in, you might be able to un brick your phone, if you ever restore it or update it. Unfortunately your touch i.d will never work again. So sorry to have to be the one to tell you. This is one of the most annoying things to happen on an iPhone.

iPhone 6

Home Button Not Working

답변 2개

iPhone 6 Home Button Link Cable

귀하의 답변을 추가하세요