주요 콘텐츠로 건너뛰기

2010년 중반기 모델 A1278 / 2.4 or 2.66 GHz Core 2 Duo 프로세서

794 질문 전체 보기

won't starts, gives? sign

My hard disk was replaced 1 year ago, a couple months later this problem appeared, I was able to fix it but now I have the same problem. Each time I move my laptop, the problem appears. Could it be a bad connection of the hard disk or cable ?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Hard Drive cable faulty or not plugged in properly. It's more likely the hard drive cable.

댓글 달기

답변 1개

선택된 답변

You're hitting a known issue in this series with the HD SATA cable. There are a few places where the cable can rub causing it to short out. You'll need to replace it. Here is the IFIXIT guide you'll need to follow: MacBook Pro 13" Unibody Mid 2010 Hard Drive Cable Replacement and here is the best cable to put in: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable. You'll need to do a bit of alteration to the system frame to make room for the bigger cable.

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable 이미지

상품

MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable

$34.99

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

I see you recommand to order the cable: MacBook Pro 13" Unibody (Mid 2012) Hard Drive Cable. But the macbook is from mid 2010.

Don't I need to order this one: MacBook Pro 13" Unibody (Mid 2009/Mid 2010) Hard Drive Cable / With Bracket / New IF163-013-1

Thanks for your help.

Well... I would go with the better designed part (2012 version). It's not to say the other part won't work it will just breakdown over time unless you do some alterations to system to try to prevent the wear issues.Lastly, you don't need the bracket version for either.

댓글 달기

귀하의 답변을 추가하세요

kristel vanmechelen 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 63