주요 콘텐츠로 건너뛰기

5세대 iPhone. 수리는 간단하며 스크루드라이버, 비집는 도구 그리고 인내가 필요합니다. GSM/CDMA / 16, 32, 또는 64 GB / 검정색 또는 흰색.

2193 질문 전체 보기

Why can't I completely close back panel? Not a prob previously.

I can’t get the back plate into place. That last couple of millimeters the lower edge of the plate slides down to line up with the bottom edge of the phone.

Didn’t have any trouble closing up after replacing the front screen. I had to open it up again when I realized I had missed the spacer under the top of the battery connector.

Now I can’t get the back panel to slide into place, closing up. Ready for 2 pentalobe screws, finishing this repair.

What am I forgetting or overlooking that I didn’t the first time? I’m almost positive the only thing I took off was the screws and the battery connector.

I doubt the Russians snuck in and messed it up somehow...so it must be something I did, not noticing...Maybe something shifted?

Everything looks fine. Nothing appears to be sticking up or out and getting in the way of full closure.

This is maddening. Help!

ThankYou!

-Mike

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

I have always had that problem with that series of iPhone. There doesn't seem to be much reason or rhyme with it. It doesn't always happen with each phone. You basically have to retry repeatedly, and use gentle force doing this. Eventually you will get it to slide perfectly into place. I agree, quite maddening

해당 답변은 도움이 되었습니까?

점수 4

댓글 1개:

Thanks for the info. Eventually, the %#*@ thing closed. It was definitely an exercise in frustration.

Of course, the next time I opened the %#*@ thing, it closed right up. No problem.

I guess the iPhone gods were just giving me grief as a newbie iPhone user. Hopefully they won't give me any trouble when I eventually get to replacing an iPad front glass/digitizer assembly. My glass being half-empty, tells me It'll be a hassle! :-)

댓글 달기

귀하의 답변을 추가하세요

Mike McIntosh 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 65