주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2681 질문 전체 보기

Touch ID not working with screen replacement but original home button

Hi all.

I can't seem to find any answers to this and it has me stumped.

I have replaced a display on a iPhone 6s but have carefully transferred the original home button to the new assembly but the touch ID will not work.

I have also removed the original lcd backplate from the broken screen and connected the home button to that and then that to the board with the same result.

Can anyone help me?

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

i think you have damaged the FTP ribbon. i have seen this so many times. the ribbon has perforations at the top of the flex on the lcd part. check the perforations for breaks where it leaves the back of the lcd metal shield. good part is you can fit a replacement ribbon just not the actual button

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Thanks for your reply. I don't think that is the case though. I was so careful when performing the replacement, and like I said in my original post, I even swapped it for the original with the same result

댓글 달기

귀하의 답변을 추가하세요

domhaywood 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 121