Just replaced display w/ full assembly but touchscreen doesn't work.

Question

iPhone 6

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Sarah Rosborough @srosborough

평판: 1

게시일: 2017년 1월 17일

옵션

Just replaced display w/ full assembly but touchscreen doesn't work.

I just installed my new iPhone 6 LCD Screen Digitizer and Full Screen Assembly.The display (and home button I reinstalled) work great on the new screen...but the touchscreen doesn't respond. I checked the connections and everything is snapped in, but the touchscreen is still unresponsive. Is there anything I can do to fix it? I made sure not to damage any connections during the install. Do you think this replacement part is faulty?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 2개:

I reinstalled my broken screen and the touchscreen works perfectly, so I know that

1.) I connected it correctly

2.) the problem is not with my phone.

This leads me to believe the part sent to me was faulty. Any thoughts?

Sarah Rosborough 의 2017년 1월 17일

Yep most likely screen faulty if the previous screen had working touch screen.

Ben 의 2017년 1월 17일

댓글 달기

답변 1개

I reinstalled my broken screen and the touchscreen works perfectly, so I know that

1.) I connected it correctly

2.) the problem is not with my phone.

This leads me to believe the part sent to me was faulty. Any thoughts? — Sarah Rosborough
Yep most likely screen faulty if the previous screen had working touch screen. — Ben

Shaun @sinistercaine 평판: 73 4 · Answer 1 · 2017-01-17T19:00:50-07:00

Shaun @sinistercaine

평판: 73

4

게시일: 2017년 1월 17일

옵션

Did a little looksie around iFixit and one solution would be to Hold your Home Button and the Power On-Off sleep button for ten or so seconds. That should restore the Touch, Stabilizer, etc.

If not it could be faulty part but I seriously doubt it is. Apple phone parts are built correct the first time.

Here are three URLs that could also be the problem - and or your solution(s).

Touch ID not working after screen replacement?

http://ifixit.org/blog/8309/iphone-6-plu...

http://macworld.co.uk/how-to/iosapps/wha...

Hope this helps.

Shaun

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기

iPhone 6

Just replaced display w/ full assembly but touchscreen doesn't work.

답변 1개

귀하의 답변을 추가하세요