주요 콘텐츠로 건너뛰기

Apple iPhone 5c는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 8, 16, 32GB / 흰색, 분홍색, 노란색, 파란색 및 녹색으로 제공하였습니다.

1233 질문 전체 보기

My sreeen doesn't want to turn on after sreeen replacement.

My friend gave me his iPhone 5c to change the sreeen it had water damage but it still work. When I change the sreeen the sreeen didn't even turn on . It been connected to iTunes it reconized it but still sreeen won't turn on what do I do?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

가장 유용한 답변

As Jason mentioned, use isopropyl that is a minimum of 91% (ideally 99%) and see if there is a difference after it dries. You can also plug the original display back in to confirm if it is a problem with the phone or if you potentially just got a DOA screen. I would advise against working on any type of water damaged device in the future without a proper ultrasonic cleaning because of issues like this or similar arising afterwards but since your already in, I hope you can get this figured out! Keep us updated!

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

Very well put. Water damage is a tricky thing but can be resolved if taking the proper steps

댓글 달기

try to clean the connectors with some gasoline and an old toothbrush on the mainboard and see what happens when you plug back in the lcd. don't forget to cross your fingers!

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Gasoline? Really?

Clean the connectors with isopropyl alcohol (99% if you can) and a soft brush toothbrush. Blow out the board of any debris that may be there and try again to connect.

Let me know if this was helpful or hot

Jason

Device Savers - Tampa

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Aldo madrigal 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 52