기기를 수리하세요 커뮤니티 상점

옵션

I replaced the carburettor and now it won't crank

I bought this scooter and it was running fine first couple days then it started flooding out worse each time I rode it. I took the carburettor off and was going to check the float when I notice the housing on the carburettor where the float is was cracked. I guess the last owner tighten the screw down to much to crack the housing. This gave me reason to buy a new one. I put the new one on and now I can't get it to crank

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi,

Here is a link to the service manuals for Jonway cycles. Select your particular engine and download it. Hopefully it will help you solve your problem.

http://www.carlsalter.com/jonway-service...

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

Thank you this was very helpful but in still having trouble this manual does not show how the fuel lines are run or the vacuum lines

의

Hi, Are the diagrams in this link any good top you?

http://mechanics.stackexchange.com/quest...

의

댓글 달기

귀하의 답변을 추가하세요

Jason 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 103