주요 콘텐츠로 건너뛰기

OnePlus' second entry into the Android phone market, the OnePlus 2, was released on August 11th 2015.

49 질문 전체 보기

Broke the antenna connection when replacing screen

Hi,

I removed the antenna wire a little too hard when I was going about replacing the screen and now it won't connect to the bottom board, I assume I just need to solder it onto the bottom and everything will work fine.

But I thought I'd ask just incase, has anyone else had this issue and fixed it by soldering?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Hi was it just the wire that was broken? If so you can buy replacement antenna cables pretty cheap, if it was the actual connection on the motherboard you my need to send it in for repair unless you have experience with this type of repair

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Hi,

Thanks for replying!

The wire isn't actually broken, I think the connection to the bottom board isn't solid.

I get a connection but it drops randomly and it's slower than dail up sometimes, I think because the wire isn't connected to the board properly its not working correctly.

I hope I don't have to take it to a shop, I may try soldering it, do you think it's a good idea?

Thanks again

댓글 달기

귀하의 답변을 추가하세요

Rohit Mohan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 93