주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2164 질문 전체 보기

iPhone 6S showing No Service After Housing Replacement Not Blacklisted

Hi,

I would much appreciate if someone could help me with this one.

I do housing replacements for a long time now. I this time haven't tested the phone carefully before I made a replacement. It catches signal for 5 mins, then it suddenly starts showing no service for 4-5 secs, then the signal comes back on.

I replaced the charging port flex with a new one, then replaced the tiny ribbon that goes from the motherboard to the camera (at the top right), then cleaned with 99.9% Isopropanol the antenna bracket, checked the screws lengths on that side, on the top left corner, performed a restore and the problem is still there, goes to no signal every 5 mins.

What else I can do? I belive this is the hardware level problem, where the components that may cause the no signal issue? The motherboard looks undamaged. Please help.

Many thanks.

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

There is an Antenna Wire on the new Charging flex cable - Make sure this is connected -

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Thank you, this is firmly connected, I also checked the connector on the board, which looks undamaged.

의견 추가하세요

귀하의 답변을 추가하십시오

Olena Scukina 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 113