The Kenmore 90 Series is a washing machine manufactured by Kenmore.

229 질문 전체 보기

Why is my washer starting and stopping

When I turn the washer on, the agitator starts moving even with the lid open and the water fills the tub. The wash cycle will run for 10 seconds and then stop for 5 or so minutes, then run for 10 seconds, etc... It takes hours for the whole thing to complete if it ever does.

model 110.20912990

Any ideas where to begin?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

선택된 해법

Robert, Try another receptacle to rule out a intermittent faulty receptacle. It sounds like you may be having an overheat issue or bad wire/plug connection, worn out over heating timer contacts or a motor on it's way out. Unplug machine and remove coverings to access and check all plugs/wires for damage, pinched, burnt, corrosion. See if you can see burnt contacts on timer or if it smells burnt. This is where you have to be careful as the machine has to be plugged in to check this, run machine till it quits, now check with DVOM/volt meter to see if motor is still receiving full voltage at the connection terminals. If motor still receiving full voltage motor is faulty, if no power the problem is further up in wire harness or timer faulty. Links below may be of some help. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=q82wD659...

http://homeguides.sfgate.com/washing-mac...

https://www.youtube.com/watch?v=OlAFQnka...

해당 답변은 도움이 되었습니까?

점수 2

댓글:

LadyTech, I see you are on tonight, what do you think? Do not be too hard on me;-)

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Robert 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 7

지난 30일: 54

전체 시간: 1,152