기기를 수리하세요 커뮤니티 상점

옵션

ODD & CPU above 3000 RPM iMac 27 mid 2011 Fan full Speed

Hi Please Dan I need your help what I should do !

I did contact my Imac 27 mid 2011 Via TV , but the Fan with Full speed loudly show up .

I coudn't use the LCD as you see the problem on the photo , molex connector

i'm fine to use TV as monitor but the problem of full speed fan is really loudly

also is it ok to run my Imac with this issue until I find solution .

Here some photo :

Logicboard molex problem !

Block Image

Block Image

Block Image

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0

댓글 3개:

did you change the hard drive?

의

No I didn't . I have plan for that once I receive OWC (In-line Digital Thermal Sensor)

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Check all the temp sensors, like the HDD sensor. Iff they are not connected or faulty, your iMac will run the fans at maximum.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 2개:

my is Imac 27 mid 2011 EMC No:2429

the HDD came without sensor only power & data cables

의

Still, the 'save mode' in an iMac is that iff there is a faulty temp sensor (any sensor, not just HDD sensor), than the fans go full speed.

So iff there is a sensor missing, not connected etc, same will happen !

의

댓글 달기

귀하의 답변을 추가하세요

Mr. MAC 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 718