기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 5.5” 스크린 iPhone은 iPhone 6의 큰 버전입니다.

1525 질문 전체 보기

옵션

touch id not working after just opening it, original button and lcd

Hello

My touch id of iPhone 6 plus isn't working anymore, had to replace the camera, but now just closing the lcd isn't working anymore (id touch) have not touched lcd or id touch button, the only wrong thing i did was not to take off battery before taking off lcd

what can i do? it says try later, no error on itunes (tried every thing)

Can I contact apple or just have to wait few days? (my friend who have a shop told me this)

This was not my first reparing

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 4개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Did you disconnect the battery? If not do a hard reset on the phone(hold down power and home button for about 10 seconds). You had to have unplugged the home button/touch id(through the interconnect cable) to replace the camera. Without a reboot phones dont recognize the touch id after unplugging and replugging it in.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

의

댓글 달기

옵션

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

do you think if i change backplate with long flex, will start working again?

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 3개:

Thats pretty much the only other part that can be replaced and still keep the touch id at this point.

의

ok thanks, gonna try it

의

Hello, did you replaced long flex cable of home button? Did the Touch ID worked fine again?

thanks.

의

댓글 달기

옵션

look under the LCD is a metal plate under that metal plate is a flex cable that connects home button with motherboard, change the flex cabble and try again

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

madaraus 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 96