I installed a new screen & digitizer. The Digitizer is not working correctly. Some spots are dead, some are offset. Like if you press "a" you get nothing. If you press "s" or "d" you get "a". To use the "Slide to Unlock" you have to swipe downward at 30-45 degree angle. With "Slide to power off" the first 75% of swipe doesn't register and the last little bit isn't enough to turn it off.
좋은 질문 입니까?
평판: 101.2k
8
172
358
@tyoung489 , Timothy, Sounds like you may have gotten a faulty digitizer. Did your old digitizer still work, if did try reinstalling and if it works, the new one must be faulty.Return the digitizer for replacement/refund. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
해당 답변은 도움이 되었습니까?
The old screen / digitizer was shattered and I can't use it to test.
Timothy Young, Recheck your connections, if all look good, undamaged and secure, probable bad part.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 65
