메인 콘텐츠로 스킵하기

A washer series by Maytag with a low rate of customer satisfaction and a high rate of failure.

157 질문 전체 보기

wont start a cycle

my machine wont start in any cycle. i tried to unplug, open and close lid 6 times. still nothing. the lights on the control panel work but it will not dfill or drain the water from the load i removed. it did flash a Sd code before this

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

Information on the "SD" error code: http://producthelp.maytag.com/Laundry/Wa...

The link states the rinse cycle is extended to get rid of the extra suds. It does this by multiple pause and rinse cycles. My advice is to shut the door and let it run overnight. If it starts to run after a while, then you know it is doing a pause/rinse cycle to remove excess suds.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

jim.frizzell 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 2

지난 7일: 4

지난 30일: 17

전체 시간: 370