메인 콘텐츠로 스킵하기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4753 질문 전체 보기

Touch stops working after a white

Hi.

I´ve got an iPhone 6 in for a repair (screen replacement)

After I replace the screen the phone seems fine, but after some minutes the touch stops working. After a while it´s okay again. I have tried several screens, and I use only original screens.

The phone had been repair somewhere else first, and when the customer broke the screen again, the touch did not work on halv of the screen (right side)

Does anyone have an idea what the problem might be? :)

-Alex

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

It's very possible the prior technician damaged the display connectors on the logic board in the previous screen replacement. Inspect the pins and solder joints thoroughly under magnification. Also, clean the connectors.

I had the same thing happen to a 6 plus. Though, the prior technician was an Apple "genius". I had to solder in a new connector.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

alex 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 30