2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4643 질문 전체 보기

After replacement of front panel assembly red lines and green lines

Hi,

I recently disassembled a water damaged iPhone 6 because I wanted to use the screen for my personal iphone which had a cracked screen. Upon, disassembly the screen was functioning with the exception of the water damaged iPhone 6 dying and a blue screen exposed.

I did research on the blue screen issue and apparently it is a hardware defect because screws were placed too hard or software. I am hypothesizing the issue may be due to the water exposure to the logic board.

After, reassembling on the new phone I got the battery charging port icon & vertical red green lines on the screen. I thought it would be caused by the digitizer cables not accurately being connected properly.

Also, note that I have reassembled this iphone with no volume control up or down buttons the cable was severed upon the smash.

If someone could answer why the red vertical lines upon front panel reassembly would be occurring? I have included a picture.

Block Image

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

가장 유용한 답변

@surf618 ,Stephen, Bad connection clean connection with Qtip dampened with 90% Isopropyl Alcohol reseat plug, damaged flex cable or connector(over bent ribbon/wires broke or pins bent/damaged in connector or on board), possibly the IC on the display is damaged or display defective, MB damaged. See the link below for more info. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.etradesupply.com/blog/how-to...

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Stephen Sizensky 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 2

전체 시간: 53