How to repair paper feed mechanism

Advice sought to repair paper feed mechanism for our anicent Canon Pixma iP1000 printer. the paper is drawn into the printer but is not being fed in properly within the printer.

Thanks for any suggestions,

Amrit

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

Here's a video of someone with the same problem, although not the same printer.

https://www.youtube.com/watch?v=lD70yNOi...

In short, check that the rollers aren't jammed, clean them and check that they role easily, apply a tiny bit of oil to the ends if they don't.

The video uploader found that a spring in charge of pushing paper had worn down and was no longer outputting enough torque, his solution was to pull the spring and wrap it around one of the hooks, ghetto, but I imagine it works.

Let me know if this fixes your issue.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Amrit Turnbull 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 249