주요 콘텐츠로 건너뛰기

모델 A1278, 2012년 6월 출시. Turbo Boost가있는 Intel 프로세서, 최대 512 MB DDR5 비디오 RAM

1623 질문 전체 보기

Broken iSight cable (pulled out of connector)

I pulled the wires out of the iSight camera cable at the logic board the connector is still in place I just pulled the cable out of the connector. How do I fix that?

MacBook Pro (mid-2012) 13"

Thank you

Update (03/09/2017)

Picture

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 4
댓글 2개

Could you please send photo

댓글 달기

답변 4개

선택된 답변

you need to replace the entire webcam with cable, which is difficult because you need to take of the entire display assembly and then separate the glass from the rest of the toplid.

해당 답변은 도움이 되었습니까?

점수 1

댓글 7개:

Ya I'm good on all that I don't need the camera that bad

You might want to use tweezers to push the broken connector out of the socket though. On some years it causes an issue with sensors, so the fan spins high speed

issues with fans are only when temp sensors are disconnected.

Fan is good I monitor it also with temperature of the CPU

On a good note it's only reaching 63 degrees C under heavy load.

댓글 2개 더보기

댓글 달기

What are the effect of a broken isight camera cable on macbook 2012 pro …apart from camera….

I need answers thats based on sensor, relation of display back light

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

i also wanna know.. because my computer suddenly cant find the wifi..

same situation here. Tore out the socket and was wondering if I really need to fix it.

댓글 달기

I have been using it without the connector for the past 1 year. All I notice for the difference is no more camera and mic is not working for me. I'm wondering if the mic has to do with the isight port or my mic just coincidence to breakdown at the same time. The rest like fan and sensors was not affected at all. I'm using a A1278 MBP.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Hi Guys i have the same problem on macbook pro 13 late 2011 and I cant find a way to remove the connector. Any ideas please because thats must be the reason that my fan works like crazy. Appreciated any help!!

Block Image

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

That 's so hard to get it out. I using the cuter . Look at the side of socket. You found the space between the plug. So using the blade insert between that and Try to push the socket out. Please try the both side left and right. Until the socket going out.

댓글 달기

귀하의 답변을 추가하세요

Collin.nesbitt@gmail.com 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 42

전체 시간: 7,254