주요 콘텐츠로 건너뛰기

모델 A1502 / 4MB 공유 L3 캐시 2.6 GHz (Turbo Boost 최대 3.1 GHz) 또는 2.8 GHz (Turbo Boost 최대 3.3 GHz) 듀얼-코어 Intel Core i7 프로세서.

493 질문 전체 보기

Screen lights up a little bit but no image, works on external monitor.

Macbook pro 13" mid 2014 works on external monitor but nothing on the retina display. The edges of the screen show white light. It blinks when it boot. I checked the connector and cable, they seems to be fine. Any idea?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Common issue on 13" Retinas, usually randomly happens or when it is knocked, and causes no picture or a black screen.

Reconnect the LCD cable logic board side first, since this usually resolves the issue (disconnect battery of course). If this doesn't work, reconnect it screen side, watch from 5:23 here https://www.youtube.com/watch?v=ZLNUjeUL...

If it is still not showing picture, try a new LCD cable. Check the screen board for liquid damage, and then the logic board if there is still no luck with this, but a reconnect should fix it.

해당 답변은 도움이 되었습니까?

점수 3

댓글 1개:

Yeah reconnect both sides and does the trick.

댓글 달기

I think it's not the connector on the logic board but the connector from the lcd. You can try to reconnected the lcd cable. It's under the black clutch.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Is there a tutorial for it? Correct me if I'm wrong, you can't replace that cable on Mid-2014 model.

I think it's possible but no tutorial. It is not that hard , ones you removed the display assembly you can open the clutch by sliding

댓글 달기

귀하의 답변을 추가하세요

SoloLay 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 473