The fourth generation of Honda Accord covering model years 1990 through 1993 available in coupe, sedan, and wagon chassis.

37 질문 전체 보기

My 1990 Honda accord EX-R hood latch is bent inward, how do I fix it?

I rear ended someone a couple weeks ago and i got a new hood for my 1990 honda accord but my hood wont shut flush. I looked at my hood latch and it is bent inward, is there anyway i can fix it myself, if so, how?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

가장 유용한 답변

diego tamesis , If you are talking about the hood latch on top of rad support they can be bent out fairly easy. Tie a rope/chain/cable around the area of the latch/cradle and the other end wraps around a 2x4, put a rag between 2x4 and bumper, now use the 2x4 to pry the hood latch/cradle into correct position. May have to fine tune with a heavy hammer and board. Ifyou are not removing any thing such as radiator,A/C condenser,etc. take your time and be careful as you do not to damage other parts. See the link below, same idea, just not as drastic. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

해당 답변은 도움이 되었습니까?

점수 4


Thank you so much! appreciate it

의 답변

diego tamesis, your welcome, I have actually had to do this before on a friends car. If you like the answer, accept it thanks.

의 답변

Hi @lpfaff1 ,

Is a 'heavy hammer' also known as an American screwdriver where you are as well? ;-)

의 답변

jayeff, :-))) I have not heard it termed that way, but maybe by some!

의 답변

I had heard of that but the urban dictionary has:

의 답변

2에 댓글 더 나타내기

의견 추가하세요

귀하의 답변을 추가하십시오

diego tamesis 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 4

지난 30일: 21

전체 시간: 314