메인 콘텐츠로 스킵하기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4752 질문 전체 보기

Aftermarket iPhone 6 screens with no polarizer?

Greetings! My team is tackling screen refurbishing and we noticed that there seem to be after market LCDs that do not appear to have a polarizer film between the outer glass and the LCD itself on iphone 6 units. Is this a common?

I assume this outer layer of glass is or has a polerizer built in (because you can see the picture) unless the whole assembly is constructed differently.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

Firstly, we haven't done screen refurbishment in over a year (mainly started around when the 5/5S/5C were out, stopped just after the 6S came out), so this might be old knowledge, however I hope it is useful.

Depending on the manufacturer of the LCD, it may or may not have a separate polariser layer, most of the time it is built into the top layer of the LCD, compared to original ones. I don't remember this causing an issue during refurbishment, since there was no polariser film to peel up, we only had to worry about not scratching the top layer of the LCD. Most of the time, this meant it was actually easier to split and clean.

After a while, we also saw a number of screens for the 5/5S/5C where the touchscreen was built into the glass, instead of the LCD, and we did start buying iPhone glass with the touchscreen built in, to allow us to refurbish these ones. Not sure if these have become more or less popular in time since I don't do iPhone repairs anymore, but just thought I would mention it in case you have come across any :)

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Thanks Reece, looks like this is the case.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

krisfuqua 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 14

전체 시간: 248