주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Screen freezes and I have to do hard reset

Hello every one as phone repair technician I would like any expert to help me with one problem that I am trying to figure it out.

My iPhone 6S Plus old screen was giving me problem sometimes flickering I was doing ok with that. Everything was working completely fine. But one day I decided to replace my screen and I did it. So after replacing my screen now the problem that I have is very annoying. Screen freezes and I have to do hard reset every single times that happens.

I cleaned all the connector very well but still same problem freezes.

But the weird part is that if I put back my old screen the screen works fine but just flickering one and a while. Oh and by the way during night new screens don't freezes so I am confused.

Any opinion?

Update (03/19/2017)

You've made too many edits recently. Wait a little while before you try again.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Hi Alberto,

Sounds like the touch IC on your logic board is going bad.

Hope this Helps

Steve

Professional Repair Tech for over 5 years

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

alberto houtmann 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 85