주요 콘텐츠로 건너뛰기

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2375 질문 전체 보기

Which screwdriver is needed for new iPhone 4 screws?

Hi,

The latest iPhone 4 uses new screws to attach the rear panel. I'm referring to the two screws on the bottom side.

It used to use standard Phillips screws, but there's now star-shaped screws, probably the Torx Plus type. What is the exact type of screwdriver needed to open these screws?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 달기

답변 6개

선택된 답변

These screws are P2 Pentalobe screws, requiring a P2 Pentalobe screwdriver. To open your phone and to put in standard Phillip's screws, get iFixit's iPhone 4 Liberation Kit.

P2 Pentalobe Screwdriver iPhone 이미지

상품

P2 Pentalobe Screwdriver iPhone

$5.99

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

I take it that this link doesn't work for you?

iPhone 4 Teardown

It says that this unit needs a Phillips #00 driver to remove these screws.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

to change the battery from my iphone 4

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

pentalobe screwdriver

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Every sites I've visited, including ifixit, claim the iphone screws are either #o or #00 size philips. I've tried sizes down to #0000 and the tips are still to large. What's the problem??

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

you need pentalobe screw driver size 0.8 mm

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Tom 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 22

전체 시간: 121,874