There's a very distinct rattle in one ear of my earbuds. This is present on multiple devices, it's been there a while but recently it's become much louder.
I'd like to open the bud to take a look at the driver and see if there's something on it but the casing seems like two pieces of fused plastic. Will I be able to open it without ruining the plastic shell?
Here's what it looks like: http://imgur.com/a/aMH4J
좋은 질문 입니까?
평판: 101.2k
8
172
357
@cm06mrs ,Matt S , you are probably correct the 2 pieces will be fused or glued and you will have to carefully go around that joint with a sharp blade very carefully not to cut too deep or cut yourself. The link below show's it being done. You may want to have some glue or 2 part epoxy on hand to rejoin. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 831
