주요 콘텐츠로 건너뛰기

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

407 질문 전체 보기

Why is my iPad 4 having ghost touches after replacing digitizer?

I recently replaced my digitizer after suffering a fall and damaging the screen. After changing the digitizer over, I turn on the device and can play on it for about 5 minutes until it begins to register random touches. Sometimes I noticed that it would happen more often if used on a certain angle. If I am using the keyboard, sometimes it will exaggerate on what I press by pressing that key letter plenty of times.

I read that using kapton tape around the digitizers frame could work, so I tried this only to find ghost touch still occuring.

Please help.

Thankyou

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

This question was migrated from http://meta.ifixit.com/Answers.

댓글 달기

답변 1개

선택된 답변

Could be faulty digitizer maybe or damaged digitizer ribbon cable from improper installation e.g crushing the digitizer cable by not tucking it in properly when closing up the iPad (putting the glass on)?

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

귀하의 답변을 추가하세요

daisypetal12 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 41