주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

replaced iPhone 5s screen but now it won't display

Hey guys I'm stumped on this one !

I shattered my screen on my iPhone and it was no biggie because I replaced like 12 of these screens in the past with no issues. this phone is being a pain in my a**, I replaced it and went to turn it on but noting showed up, so I connected it to iTunes and it recognized it and then I grabbed one of my customers 5s and tried the screen on it and it was 100% fine . I put the screen back on my phone and still no luck so I'm a bit stumped, any thing is helpful at this point.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

@dobos1,Jerod , Try cleaning and check the connector on the board for bent/damaged/missing pins and use a magnifying glass to look at the board for loose /damage/missing components/capacitor/etc. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

Either the display is defective or you fried the backlight driver by connecting the display while the battery was not disconnected.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

If the backlight driver became fried can I salvage this part from another iPhone 5s or is it not worth it?

You can salvage it, but you also need to reball the salvaged one

댓글 달기

귀하의 답변을 추가하세요

Jerod 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 59