My Epson Workforce WF-7610 is printing blurred lines horizontally across the page, i performed a horizontal head alignment print and every lower box has the top half completely blurred and faded. I've run the printer head clean a few times but no joy. Anyone have any ideas on how i can fix this?
Many thanks,
좋은 질문 입니까?
평판: 10.3k
15
29
6
HAve you tried cleaning the ink? Remove the cartrage and using 99% or 91% Rubbing Alchocol clean the part where the ink comes out and the contacts. If this doesnt fix it you might be running low on ink. Try replacing the cartrage and see if that makes a difference.
Hope this helps and good luck fixing!
해당 답변은 도움이 되었습니까?
This cleared up MY blurry printing problem (Epson WF-76100 when all else failed - alignment, cleaned print heads - but BE WARNED - you’ll have to clean the print heads and do the whole alignment thing all over again. ugh.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 8
전체 시간: 2,323
