New battery not working after 100% charge

After replacing battery in HP Folio 13-2000 with a genuine HP battery when the power supply is connected to laptop it works great and shows that the battery is being charged. After letting battery get to 100% charge, I removed the power supply and the laptop immediately powers off. I tried to do a battery test with the HP support troubleshooter and it says not battery is detected, yet it shows the battery icon in system tray being charged. Laptop was working fine until battery died and was used with power supply until new battery was purchased and changed. I have checked all wires and all is good. I even changed back to old battery and get exact same results. Is this a common thing with an internal battery device??

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

1개의 답변

@bdankers ,Brian, Use the HP Resolving "Battery Not Detected" Problems trouble shooting link below to hopefully fix your issue. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

http://support.hp.com/us-en/document/c01...

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Brian Dankers 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 2

전체 시간: 95