주요 콘텐츠로 건너뛰기

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2261 질문 전체 보기

iPhone 7 bent error 4013 when trying to restore.

Hey I got an iphone 7 from a customer today that gives error 4013 when trying to restore. The iphone has a good bend at about the screen connector area and bootloops when not in dfu mode. Any good ideas or places for me to start?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

가장 유용한 답변

Take the logic board out of the housing and try to restore, 4013 is usually a NAND issue unfortunately.

해당 답변은 도움이 되었습니까?

점수 5

댓글 5개:

Great answer! I can always reball the NAND do you think think that might do it?

It might, the only way to find out is to try.

@pccheese is right. You'll have to reball. You can't swap the nand for a different one, it has all your data on it. Reballing in itself is a technique you'll have to learn. I'm still not sure about mine

@theimedic, I haven't been participating in this conversation. @nicklandreth is Nick's username. What made you think of my name?

Oop. My bad. Musta just missed ya, bro

댓글 달기

Start with the bend. There is probably an IC around the bent area that has a damaged solder connection.

해당 답변은 도움이 되었습니까?

점수 1

댓글 3개:

I figured that but I dont know how to check if they have been compromised. do you know any techniques for this?

You'll want to get a digital multimeter and test the circuits (capacitors and such) around the area and find out if it's actually one of those that's the problem. Microsoldering is not for the beginner repair tech. I've already spent thousands on my lab, and very interested in spending thousands more. Not to mention the man/woman/transgen...people hours you'll need to learn how to use the techniques to do this work

I have this issue now with my customer i would try reheating the nand ill update you all

댓글 달기

귀하의 답변을 추가하세요

Nick 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,861