기기를 수리하세요 커뮤니티 상점

모델 A1418 / Late 2012 / 2.7 & 2.9 GHz Core i5 또는 3.1 GHz Core i7 프로세서

212 질문 전체 보기

옵션

Logic Board Faulty or Damaged?

Hello There... I was wondering if someone can give some clue what is happening in this situation..:

problem: iMac won't turn on...

tests:

1. Removed lcd/glass panel successfully, I notice that NONE diagnostic led was on... so...

I went..:

2. I checked de AC cable, and it gave me the 120V AC from the outlet so we are good...

3. checked inside AC input in the Mac, and also gave me the 120V AC... (good)

4. I plugged in the PSU, and tested some pins with the ground pin... and 3 pins gave me 12V DC. (so I think the PSU is fine)

What else can I try????

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

The PSU may receive power but is not sending further to the board, before going after a logic board damage i would try with a new power supply. Most of the cases when no diagnostic led is on the board doesn't receive power due to a faulty power supply.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 5개:

@kaykay another one hits 500

의

even though the PSU pinout gave me 12V DC on 3 pins?... I will try another psu..

의

Always keeping an eye out for me @mayer. Thank you :)

의

Hello there, after all.. I installed a new PSU, the imac start working again... but.. after several hours the iMac was on.. it turned off... so I checked again inside, and I have no leds on... (again)... I have no clue what is happening...

의

@makibuki //have u found problem. i have the same issue

의

댓글 달기

귀하의 답변을 추가하세요

jbermudez27 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 253