주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

iPhone 6S Plus Main Camera, 3D touch and flash light Not working

I have an iPhone 6S Plus with some issues. Main Camera and 3D touch Not working at all, flash light Not Working too. I checked the motherboard and I see sigh of water damage but everything else works fine. Do I need to replace any IC to solve this issue? What parts do I need to inspect with the microscope and test? Maybe some parts (like Resistors, Capacitors or IC) burned. I would appreciate your help. Thank you!!!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Clean the board and replace any bad components.

해당 답변은 도움이 되었습니까?

점수 2

댓글 6개:

I cleaned the motherboard, how can I find the bad parts; I can't see any clear damage with the microscope. What parts needs to test with the multimeter; maybe a chip needs replacement or some resistors-capasitors-filters

Are any components blackened/burnt?

I don't see any black components near the main camera connector

What about pins on the connector? Are those burnt a little?

no, seems it is ok. I think the problem is on the camera chip.

댓글 1개 더보기

댓글 달기

귀하의 답변을 추가하세요

johnfl21 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 196