주요 콘텐츠로 건너뛰기

13" 알루미늄 unibody, 2.0 또는 2.4 GHz Core 2 Duo 프로세서.

637 질문 전체 보기

Right LCD Screen Assembly hinge lock broken after drop

Well, i just dropped my MacBook Pro 13" Mid-2012 and the right hinge broke, but not the movable part but the hinge on the screen assembly

Is there any way this can be fixed?

Image included.

Block Image

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

The part you highlighted is attached to a large frame thing inside the display assembly. You can access and replace this frame, but you will have to remove the glass and the LCD panel first, which is quite a time consuming repair (MacBook Pro 13" Unibody Mid 2010 LCD Replacement). Then, you can take out the screws that hold the frame in place, heat the adhesive and the frame will separate from the back cover. I don't know of any sources that sell just the frame, so you will probably have to salvage it from another LCD assembly.

It's most likely the best for you to just buy a whole display assembly and replace the broken one with it. (MacBook Pro 13" Unibody Mid 2012 Display Replacement)

MacBook Pro 13" Unibody Mid 2010 LCD 이미지

안내서

MacBook Pro 13" Unibody Mid 2010 LCD Replacement

난이도:

매우 어려움

2 - 3 hours

MacBook Pro 13" Unibody Mid 2012 Display 이미지

안내서

MacBook Pro 13" Unibody Mid 2012 Display Replacement

난이도:

보통

30 minutes - 1 hour

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Robert G 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 76