I replaced the housing of my iPhone 6, now my back camera isnt focusing anymore.
So I thought I broke the camera, I replaced the camera with a new one but it is still the same issue.
The images are blurred, can anyone help me with this?
좋은 질문 입니까?
평판: 221.4k
15
289
806
I would check out the "lens" in the housing. It may be dirty or have a fingerprint on it. You will need to clean it with either a magic pen or some IPA and a clean q-tip.
해당 답변은 도움이 되었습니까?
It is a custom housing and I believe it doesnt have a lens in the housing.
Could that be the problem?
If there was no lens, then it wouldn't be blurry unless it was the camera itself that was the issue.
평판: 21.2k
5
19
70
Hi,
Custom or non original housings tend to have a low quality plastic lens.
This would need removing and replaced with a glass lens.
Or there may be dirt on the lens itself.
해당 답변은 도움이 되었습니까?
Or a foil of protective nylon.
Or that also!
24 시간 전: 0
7일 전: 1
30일 전: 1
전체 시간: 331
댓글 1개
I will open my phone tomorrow and let you guys know, thanks!
Zackito 의