주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2023 질문 전체 보기

Screen connectors don't fit

Hey can someone help me please?! I bought an iphone 6s replacement screen for my iphone 6s because the screen is broken... And I just switched all the parts from the old screen onto the new one! And as Im about to put the 4 conectors back in well they dont fit?! Can anyone help me please?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

If it has 4 connectors as you say you got the iPhone 6 screen replacement. The 6s only has 3 connectors.

의 답변

의견 추가하세요

PC 노트북 배터리

품질을 보증하는 모든 최고의 PC 브랜드용 배터리

지금 장보기

PC 노트북 배터리

품질을 보증하는 모든 최고의 PC 브랜드용 배터리

지금 장보기

4개의 답변

선택된 해법

First, you should probably verify the model of your phone and make sure you've got the right part. I'm pretty sure a fully assembled iPhone 6s display should have three connectors, not four.

Next, compare the new display with the old display. Are they identical? Are the connectors physically different? Sometimes the display ribbon cables get folded in the wrong order so they won't line up properly, and in that case it's a simple matter of carefully reorganizing the cables so they line up with their sockets.

Let us know what you find and maybe we can help further. Good luck!

해당 답변은 도움이 되었습니까?

점수 5

댓글:

Hey! Thanks for the reply. I bought an Iphone off someone and they said it was an Iphone 6s and I believe them and I ordered and Iphone 6s Screen.. My phone is actually an iphone 6. I ordered a Iphone 6 screen and it has all turned out well! Thanks mate.

의 답변

의견 추가하세요

This happens with aftermarket displays. The connector socket cables won't fit in the connector sockets. Or the stupid foam sticker on the cable is misaligned, and it deeks me out, can't get em on properly. I do agree with @jeffsu lets make sure you got the right part. Also when you put the connector cables on, push down on the side, not middle, then the other side

해당 답변은 도움이 되었습니까?

점수 5
의견 추가하세요

I think i ran into the same problem the iPhone 6s plus has touch button cable built into digitizer the iphone 6 plus has it in the metal that covers digitizer . Live and Learn.

Correct me if im wrong. Haven't been able to verify. But reordered made sure model # for my phone was listed. All is well.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I bought a new screen for my iPhone 6, and it says on the package it’s for iPhone 6, and it all fit, and I transferred the parts over to the new screen. But the middle connector to plug the screen in won’t plug in. The home button connector and the other two will connect just fine, but the middle one won’t connect. Any ideas?

해당 답변은 도움이 되었습니까?

점수 0

댓글:

That just happened me, in case you didn’t figure it out You need to remove the metal back cover and readjust the cable attached to tha metal cover. This actually slots in the middle of the 2 main cables on the new screen. I think I fkd my main board as I tried starting it up knowing that they didn’t sit properly.

의 답변

Hey I kinda have the same problem but I don’t get what you mean by removing the metal back cover. You’re not talking about the cover of the screen cable right?

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Kaya Rezende 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 37

지난 7일: 83

지난 30일: 518

전체 시간: 12,732