기기를 수리하세요 커뮤니티 상점

모델 번호 A1238 / 80, 120, 또는160GB 하드 드라이브 / 검정색 또는 은색 금속 외형

904 질문 전체 보기

옵션

iPod Classic will not boot after battery replacement

Hello!

I've got an iPod Classic 7g thin 160GB that only holds a charge for an hour or so. I ordered a battery kit from ifixit, followed the directions exactly, and the iPod refuses to boot.

With the new battery installed, the iPod appears dead, no nothing. When I plug it in with the lock switch in the 'unlocked' position, the Apple logo faintly flashes for a nanosecond, goes dark, and repeats endlessly. Once I flip the switch to 'locked,' the screen goes blank.

I know I didn't damage anything because when I reinstall the stock battery and it boots and works fine. Could I have gotten a bad battery?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

@spoonland3r sounds to me like you answered your own question "when I reinstall the stock battery and it boots and works fine." thus it sure sounds like a bad battery. I would recommend you replace it once more. Please make sure that you are careful around the battery connector. This model has issues with it coming of the board. I use a L-shaped paperclip to lift the locking mechanism.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Thanks for the reply! I was careful to unclip and reclip the connector very gently with the spudger in the kit. I'll get in touch with ifixit for an RMA then.

의

댓글 달기

귀하의 답변을 추가하세요

Eli Horyza 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 82