주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Do they make a glue of some sort for a ribbon strip?

Ive had to replace my LCD and glass screen a couple of times and now after a few months the touchscreen doesn't work unless I put pressure on the top right where the ribbon strip plugs in. I've had to open it up and snap the strip back down in the past but now it doesn't want to stay snapped in. Is there some sort of glue for electronics such as that? I may have to close something against it to keep pressure on it. It may work for a while.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

선택된 답변

You do not wanna really use adhesive or glue on this. It might ruin the port in which your flex cable goes it to. What you might wanna use it maybe a piece of electrical tape. This will help because if you ever have to replace it again, you can jist peel off the tape. And the adhesive on it will also be able to be taken off as well.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Good call on the electrical tape although I didn't use it to tape it. I rolled up enough to keep pressure against the strip and closed it up. Working good for now.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Jason 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 12

전체 시간: 1,226