기기를 수리하세요 커뮤니티 상점

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

옵션

Black screen after battery replacement

Hello all,

I replaced the battery of my iPhone 6. So far so good, the iPhone 6 was working for like 5/6 min. After that time, the screen went black. I tested the screen on another iPhone 6 and it works just fine. Again I bought a new battery and tested it, it didn't work.

When I plug the iPhone in my computer, iTunes pops up. It says that iTunes cannot enter the iPhone cause of the security code.

Do you perhaps know how I can solve this issue?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Did you make sure to disconnect and drain the board when removing the original battery?

To me this sounds like a backlight chip on the board has blown. Common when not draining the board.

Get a flashlight and shine it on the screen when you believe its on. If there is an image, then my assumptions are correct. You will need to find someone who can do micro-soldering work

hope this helps

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

The original battery was already drained. It was so messed up that it didn't want to charge.

I think that some chip is blown but not sure which one. Perhaps the backlight chip is broken, not sure. I tried to shine bright flashlight on the screen and I could not see anything. The screen was still black.

I do not have the equipment to test it. It find someone who can do the micro-soldering work. Thx tho.

의

댓글 달기

옵션

Hello, Try to do soft reset or (reboot) Power Button+ Home Button for 10s and see.

You won't lose any data.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

No no, I want to keep my data. I do not have some photos on my iCloud.

의

댓글 달기

귀하의 답변을 추가하세요

GiGaN00B 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 4,842