기기를 수리하세요 커뮤니티 상점

2011년 7월 21일에 출시되었습니다. Core i5 또는 Core i7 프로세서. Thunderbolt. 이 기기는 Mac mini Server 구성을 실행하는데도 사용됩니다.

204 질문 전체 보기

옵션

Heat Sink Cowling & Fan stuck together when removing.

I have been able to complete this task with no problems on other Mac minis of the same model, but I am perplexed by this.

When removing the top left T6 screw that secures the fan and heat sink cowling to the logic - on left in this picture: https://d3nevzfk7ii3be.cloudfront.net/ig... - I was unable to lift the fan on its own until I disconnected the cowling from the logic board so that I could lift them both together.

Block Image

Block Image

As I lifted them clear, a small spring popped out.

I am sure that I could replace the pair of them still coupled, but can anyone tell me how to separate them please? Is this a pair of screws (one screwed into the other)?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Yes, I think the top screw is screwed into the insert screw that goes to the frame. Grab the bottom screw and turn the top screw until it comes out.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 5개:

Thanks. I had tried it already, but I'll give it another go now.

의

Try not to grasp it by the threads.

의

It's well and truly stuck. I am avoiding the threads, but I can't seem to get a good enough grip to stop the bottom screw turning in the jaws of the pliers. I suspect I could do it in a vice, but I think this would screw-up (pun intended) the threads.

I've got the parts back in the mini for now, so I hope I will not need to open it again for a while!

의

You probably would need two of these: Screw Extracting Pliers

의

@lorccan any luck getting that screw out, i'm in the same problem

의

댓글 달기

귀하의 답변을 추가하세요

lorccan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 2

전체 시간: 294