주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2058 질문 전체 보기

Caller can't hear me after port change

I've changed the charging port on a 6s and when I checked it everything was working as it should, now the mic has stopped working on calls. I can be heard when in loud speaker and hands free only, there was a metal shim on the mic at the right of the port that I couldn't get off the old one so I hadn't replaced it. Could this be causing the issue?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

선택된 해법

I recommend testing the charging ports before install, most functionality coming from it if possible.

Sounds like a faulty charging port (main microphones on the port not working). I suppose it could of went faulty from being improperly installed (tear in ribbon cable / puncture).

I have replaced them before, but not really sure what metal shim you are referring to.

Are you referring to this in step 46:

iPhone 6s Lightning Connector Assembly Replacement

There is black tape covering a screw hole for a metal cover for an antenna cable.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Hi, thanks for your response. I've done loads of charging ports and never had an issue before, if you look at step 55 there is a spudger on the mic with the metal shim which was missing on my replacement charging port.

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

S2i 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 61