주요 콘텐츠로 건너뛰기

Epson's L220 is ideal for home and home office users looking for good-quality, ultra-low-cost printing, scanning, and copying. Released around 2016.

9 질문 전체 보기

My epson L220 printer : ink and paper red light blinking alternately

This problem occur when my friend refilled the ink.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 64
댓글 11개

i need its solution....

my printer is alarm red light blink

please answer

Signal red light and paper jam

My printer is telling me that a printer's ink pad is at the end

댓글 6개 더보기

댓글 달기

답변 6개

선택된 답변

Your printer waste ink counter overflow, you have to reset your printer waste ink counters.

Please try with this solution: https://resetkey.net/epson-l220-resetter...

해당 답변은 도움이 되었습니까?

점수 22

댓글 2개:

epson printer l220 paper and ink blinking

i dont know how to do please help me

@maricel.cutie Step 1: Download WIC Reset Tool here: https://resetkey.net/download ,

Step 2: Connect printer and computer by USB Cable, computer connect to the Internet.

Step 3: Reset Epson L220 printer's waste ink counter by follow this guide: https://resetkey.net/epson-l220-resetter... - FREE to reset Waste ink counters to 90%

Watch this video:

https://www.youtube.com/watch?v=AwAW-ZUu...

댓글 달기

epson printer l220 3light blink

해당 답변은 도움이 되었습니까?

점수 7
댓글 달기

https://www.youtube.com/watch?v=uqJhfufi...

해당 답변은 도움이 되었습니까?

점수 4
댓글 달기

Ink and paper lights blinking alternately means that your internal “waste ink pads” are full and need resetting/cleaning out.

Check your Epson Status Monitor (on PC) for any error messages - if it says “service required” or “…end of service life” then it’s the waste pads.

You’ll need to reset the internal counter using WIC Reset tool (a reset key can be had very cheaply).

Then you’ll need to either:

a) clean or replace the internal pads (usually just a case of removing one or two screws on the recent Epsons)

b) extend a piece of tubing out of the printer and directing all waste ink to an external container, such as a bottle or tub.

해당 답변은 도움이 되었습니까?

점수 4
댓글 달기

Tested, tried and successful. You can reset your waste ink counter but you have to avoid waste ink pad overflow.

  1. How to reset your printer waste ink counter?

I found this video, helpful for me https://www.youtube.com/watch?v=rb3CIhXZ...

  1. How to avoid waste ink pad overflow?

I found this post on ifixit: How to Hack Epson L200's Waste Ink Pad

Good luck!

해당 답변은 도움이 되었습니까?

점수 4
댓글 달기

Ink and paper lights blinking alternately means that your internal “waste ink pads” are full and need resetting/cleaning out.

Check your Epson Status Monitor (on PC) for any error messages - if it says “service required” or “…end of service life” then it’s the waste pads.

You’ll need to reset the internal counter using WIC Reset tool (a reset key can be had very cheaply).

Then you’ll need to either:

a) clean or replace the internal pads (usually just a case of removing one or two screws on the recent Epsons)

b) extend a piece of tubing out of the printer and directing all waste ink to an external container, such as a bottle or tub.


해당 답변은 도움이 되었습니까?

점수 -1

댓글 1개:

Erm... this us the exact same thing I wrote, is it not?

댓글 달기

귀하의 답변을 추가하세요

rar 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 16

7일 전: 132

30일 전: 565

전체 시간: 112,718