주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

2.2, 2.4, 2.5, 또는 2.6 GHz Core 2 Duo 프로세서

975 질문 전체 보기

Backlight and iSight Dead, is it just cable or worse?

I just replaced the screen on my Macbook Pro a1226, but the backlight is dead. I can see the screen images with a flashlight and it works with an external monitor. Also, the iSight camera is dead and doesn't show up in the system profiler.

I'm guessing that I must have damaged the backlight/isight cable and will replace it. BUT, with the symptoms above, is there any chance it is: 1) the inverter; 2) the I/O board; or 3) the logic board?

Thanks so much!

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

LCD iPhone 스크린 수리 키트

평생 품질 보증이 적용되는 저렴한 옵션.

키트 쇼핑하기

LCD iPhone 스크린 수리 키트

수리의 질 말고 비용을 절감하세요.

키트 쇼핑하기

답변 1개

선택된 해법

The flashlight test reveals a non-functioning inverter. With the iSight also out, I'd bet you have disconnected your cables. Why did you replace the screen?

해당 답변은 도움이 되었습니까?

점수 3

댓글:

The lcd broke, so I replaced it. Turns out the one I got on ebay was broken too, so I replaced it again. Lots of opportunity for me to mess something up, but I think I did a good job reconnecting stuff. I'll check again, but any other ideas? Thanks.

Hook it up to an external monitor to see if all your problems are isolated to the upper. I don't know which guide you used but I recommend this one, because I wrote it: MacBook Core 2 Duo LCD & Inverter A1181 (fast method) Replacement

의견 추가하세요

귀하의 답변을 추가하십시오

jpkjpkjpk 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 833