The Apple iPhone 5s was announced on September 10, 2013. Repair of this device is similar to the previous models, and requires screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Silver, Gold, and Space Gray.

3721 질문 전체 보기

Why after replacing a charging port does my speaker not work

I have repaired multiple iPhone 5s’s that don’t charge however each time I replace the charging port the speaker no longer works. I can’t find anything online and am sure I’m making a stupid mistake.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

3개의 답변

선택된 해법

Only thing I can think of is battery was plugged in during charging port replacement.

The loudspeaker is connected by two connection points to the charger port so it could be that the charging ports are getting physically damaged during install or they are just faulty.

해당 답변은 도움이 되었습니까?

점수 3
의견 추가하세요

So it is some mistake in your process of replacing Charging point. You may shorted speaker pcb circuit line while replacing charging point.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Or the pins on the speaker just aren't making contact with the charging port flex... clean the gold contacts on the flex and bend the pins a little on the speaker and ensure u place all the correct screws back in

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Also u can get bad charging flexs where the speaker part doesn't work so if it is seated correctly and the speaker makes a good connection before u move on to looking at the board try another part from another source

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Louis Parker 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 5

지난 30일: 34

전체 시간: 197