옵션

Repacement digitizer had dead zones

I've replaced the digitizer on my ipad because it was cracked.

The reassembly went okay but there are zones that don't work. Particularly the top 30mm or so. I have to keep rotating the the screen to access different keys on the keyboard when typing. I've essentially given up trying to use it but thought to give it one last try.

Of course the digitizer itself may be faulty but I'm wondering if it's a connectivity issue in the ribbon connector?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2017년 8월 4일

옵션

It could be both...

I would start by doing a thorough visual inspection of the digitizer connectors on the logic board to insure there isn't any debris. The digitizer connectors also have locking flaps; check them to insure they are not cracked or broken which could cause improper electrical connections. Finally, inspect the flex for tears. Even micro-tears can be problematic due to the trace density involved.

If all of that looks okay, then it's probably your digitizer. You could order another one and try again or have the one you ordered replaced under warranty.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

iPad 3G

Repacement digitizer had dead zones

답변 1개

귀하의 답변을 추가하세요