기기를 수리하세요 커뮤니티 상점

A Kenmore residential washing machine made between 2001 and 2009. Identify the age of your Kenmore washer with its serial number.

79 질문 전체 보기

옵션

The washer keeps going threw cycles without stoping . c

I had it calibrated twice now and it now will not spin out all water. Then states sucking out water while lid is open . It would never even work without lid being lock before this. Please help

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 1개

I unplugged my washer for about 1 hour, and plugged it back in, and it went through it's cycles normal again..

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Start here:

Cause 1

Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle. To determine if the lid switch assembly is defective, use a multimeter to test each of the lid switches for continuity. If a lid switch does not have continuity, replace it.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

I unplugged my washer for an hour, and then plugged it back in and in ran it's cycles normal again... Idk why it was necessary but it reset it somehow,..good luck...

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Rebecca 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 8

30일 전: 12

전체 시간: 744