처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1961 질문 전체 보기

What will make adhesive strips stick on both sides?

I have the iPhone 3GS front panel repair kit and I got through most of the process successfully, but I have gotten stuck with the adhesive strips. They stuck to the inside of the plastic fine, but I cannot tell if the orange plastic should be removed from something to attach the new front panel or if there is something else I should do. The only side that is sticky is the side that is down.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

3개의 답변

선택된 해법

The double sided strips are a pain, bare with it and either get a Stanley knife on one of the tiny tabs and try to get tape up. I have found that folding a corner before removing orange paper helps. Mostly it is swearing and patience though.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요
가장 유용한 답변

This would probably work well for your purpose: http://www.newegg.com/Product/Product.as...

해당 답변은 도움이 되었습니까?

점수 2

댓글:

I disagree with Polly on the swearing.

I find that machines that have been cursed over a lot have strange anomalies. It seems to take an inordinate amount of time to get them working properly. It’s like they’ve been hit with electrostatic discharge. So I recommend keeping the swearing to a minimum. Talk to machine nicely in a pleasant voice and tell it how great a machine it is and what a great heritage it has and that you’re proud to own it and it will seem to perk up and run much better. I do agree with Polly about the patience

의 답변

You're right! But then people think you're crackers instead of cross with a tiny bit of sticky paper.... Lol

의 답변

Oh well, I talk to my plants too and they respond well, but it could just be the additional CO2 they get from me ;-) besides most people already KNOW I'm crackers.

의 답변

의견 추가하세요

They do have glue on both sides . I can tell you that I replaced a screen with the 3M stickers and the sticky layer is very-very thin , probably thinner than human hair , it has a paper cover that says 3M on it , you remove one side and stick it on the screen frame and then you remove the second one while it's stuck to the frame .

You can find instructional videos .

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

camalaya 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,036