주요 콘텐츠로 건너뛰기

Apple iPhone 5c는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 8, 16, 32GB / 흰색, 분홍색, 노란색, 파란색 및 녹색으로 제공하였습니다.

1229 질문 전체 보기

Won't charge, says This accessory may not be supported.

So here's the story; phone poorly taken apart, damaged chips, managed to get it to work but won't charge. One of the charging ics which I forget the name (9 pins, MOSFET, controls charging) was missing and had 3 ripped pads. Replaced that, now phones recognises charger bit says this accessory may not be supported, before would not recognise it at all. Not showing on pc at all. What should I replace next?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

Hey Giga, I just noticed this question. If you haven't fixed this yet, please let me know which IC exactly you replaced so that I can help you out.

댓글 달기

답변 3개

선택된 해법

@refectio i just used the board as a donor, used almost all the parts.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Cool, at least you put it to good use.

댓글 달기

1. Remove any debris from the charging port on the bottom of your device.

2. Restart your iOS device.

3. Try a different USB cable or charger.

4. Make sure that you have the latest version of iOS.

5. Contact Apple Support to set up service.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

No, read the OPs original post. He took it apart and messed with the internals. It has nothing to do with a dirty charge port or bad cable/charger.

This is unforunately the help you get in Apple forums.... a generic stupid easy answer that doesn't answer any of your questions.

Apple support is always giving basic unrealistic solutions to your problem, where in the world did you need latest software to have a well charging phone?

댓글 달기

I Absolutely agree John

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Gigabit87898 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 4

전체 시간: 44,015