AR drone 2.0 board to board connector - need to solder it back

Question

Parrot AR.Drone 2.0

Version 2 of Parrot's toy quadcopter with HD camera, controlled over Wifi by smartphone.

24 질문 전체 보기

Tomasz Lewicki @tomek_l

평판: 1

게시일: 2017년 9월 16일

옵션

AR drone 2.0 board to board connector - need to solder it back

Hey,

So today I flew my ar.drone 2.0 around and had a crash.

After the crash I got "PIC watchdog emergency" notification on the screen.

Disassembled the thing and noticed that the board-to-board connector partly chipped off the PCB taking some of the solder pads with it.

Has anyone had similar issue or experience with fixing the ar drone 2.0 PCB?

Are there any PCB schematics on the Internet? I didn't have luck with finding any.

Thanks in advance!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

oldturkey03 @oldturkey03 평판: 782.2k 1.1k 893 2.3k · Answer 1 · 2017-09-16T07:04:08-07:00

가장 유용한 답변

oldturkey03 @oldturkey03

평판: 782.2k

1.1k

893

2.3k

게시일: 2017년 9월 16일

옵션

@tomek_l there are no schematics of it yet. It is extremely difficult to find anything repair related on any drone. In your case I'd suggest you contact a good microsoldering business (this will depend on where you live etc.) and have them take a look at it. Sometimes traces can be rebuild and the experts can almost always come up with a fix. It might also help if you post some images of your damage with your question. For that use this guide 기존 질문에 이미지 추가하기

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

Parrot AR.Drone 2.0

AR drone 2.0 board to board connector - need to solder it back

답변 1개

귀하의 답변을 추가하세요