Screen does not turn on at all (tried replacing charging port as well)

Question

iPhone 6

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

robert7kim7 @robert7kim7

평판: 1

게시일: 2017년 9월 19일

옵션

Screen does not turn on at all (tried replacing charging port as well)

I had replaced my sister's battery recently as it was starting to lose its charge very quickly. However, in a month or so, she comes back with a broken phone that does not turn on or is recognizable to itunes either.

She told me she had used a portable fan that plugs into the bottom of the phone (a cheap chinese brand I think) which I speculated is what caused the damage to the phone. What do you guys think? Or, it's just coincidence and happened to died right after.

But anyways, so I thought it was the charging port that broke. So I replaced that, and still no luck. Also, tried hard resetting as well. If you guys could give any ideas on this, that'd be incredible!

Thanks,

Robert

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 3개

선택된 답변

Minho @refectio

평판: 221.4k

15

289

807

게시일: 2017년 9월 19일

옵션

You're probably right. Cheap peripherals can draw too much current or cause voltage spikes that damage the charging circuit (Tristar).

This will have to be repaired by a shop that does micro-soldering work.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 5개:

Thank you for the response. How much do you think it would cost to repair that?

robert7kim7 의 2017년 9월 19일

Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point

Minho 의 2017년 9월 19일

@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know.

Minho 의 2017년 9월 19일

Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right?

mayer 의 2017년 9월 19일

@refectio @mayer looks good to me as well.

oldturkey03 의 2017년 9월 19일

댓글 달기

Thank you for the response. How much do you think it would cost to repair that? — robert7kim7
Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point — Minho
@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know. — Minho
Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right? — mayer

joel rakich @ripper 평판: 257 4 1 · Answer 1 · 2017-09-19T17:45:39-07:00

joel rakich @ripper

평판: 257

4

1

게시일: 2017년 9월 19일

옵션

Have you checked voltage on the battery? Maybe the new battery was junk and died already, especially if it was an ebay part. Use a multi meter on the outer pins of the battery connector. Report back what you find.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Good point !

Minho 의 2017년 9월 19일

댓글 달기