Soldering to USB +5V

Question

Rasperry PI Zero into cheapo Projector

Prokrastinator @prokrastinator

평판: 338

5

1

게시일: 2017년 9월 20일

옵션

Soldering to USB +5V

So i have that Ali express LED Lamp projector, it has in build speakers and a LCD image unit that displays in 800x600. I thought i would be nice to upgrade it with a raspberry pi 0 that i got for birthsday. Just to play around with emulators.

I want the Pi to sit inside the projector, there is even some room left for it, i would take the HDMI cable outside just like this guy did:

https://www.youtube.com/watch?v=mff-F39f...

And use the 5V pin of the USB (inside the projector) port to the PI

My simple question is:

Will the USB port from the projector still work (for USB sticks) when the raspberry is powered by it?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 1개

Thank you!

Didn't thought about the heat. And there's really not much free space left for proper ventilation with the Pi inside.

Prokrastinator 의 2017년 9월 20일

댓글 달기

답변 1개

Thank you!

Didn't thought about the heat. And there's really not much free space left for proper ventilation with the Pi inside. — Prokrastinator

George A. @pccheese 평판: 21.8k 31 57 42 · Answer 1 · 2017-09-20T20:40:01-07:00

가장 유용한 답변

George A. @pccheese

평판: 21.8k

31

57

42

게시일: 2017년 9월 20일

옵션

I wouldn't use it. The RPi 0 requires a minimum of 2.0Ah. It's had to imagine that the projector outputs more than 500mah. It'd probably run, but not very well. And certainly not when a USB flash drive is in use. You should use a separate power supply.

Last thing, if the projector is even slightly hot it will probably overheat the RPi.

Hope this helps!

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 달기

Rasperry PI Zero into cheapo Projector

Soldering to USB +5V

답변 1개

귀하의 답변을 추가하세요